Roll Former Corporation

 Since 1978   
Rollformer Corporation - Made in USA - Since 1978 Made in USA

Now 40 Years
of Excellence

 

Roll Former Corporation

Roll Former Corporation
140 Independence Lane
Chalfont, PA  18914   USA

P: (215) 997-2511
F: (215) 997-5544

Thank you for your interest in the Roll Former Corporation line of quality equipment!

Please find our standard SS20A Machine (2" Structural Panel) information to follow. The SS20A – 2” Roof Panel is one of the most used Commercial Panels in the Metal Construction Industry.

This machine is complete with hydraulic drive and front hydraulic scissors shear, adjustable panel width of 12” to 20”, Stiffening Ribs (2) and Striation Rib stages. The Power requirement is 5 HP 220 Volt 5 GPM 1 Phase or 3 Phase.

The base price for the SS20A Machine is $71,200.

Additional Options include:
Digital Controller for fully automatic operation
SS Industrial Seamer “Kit”
3000 and 5000 Lbs. capacity Decoilers (Non – Powered)
Machine Stand with Leveler Pads (Shop Use)
Hot Melt Butyl Caulk System

Lead-time varies but is generally 26 weeks upon PO and a 30% Deposit, balance due Prepaid or COD.

 

FOB - Chalfont, PA

Crating Charges - $300

 

All Roll Former Corporation Machines are made in the USA!

Sincerely,
John

John R. Dumke
Vice President / Director, Sales & Mkt.
Phone: 215-997-2511
jdumke@rollformercorp.com




find us on facebook

Copyright 1997-2005 Roll Former Corporation -- All Rights Reserved

Search Engine Optimization by Dynamic Digital Avertising