Roll Former Corporation

 Since 1978   
Rollformer Corporation - Made in USA - Since 1978 Made in USA

Over 30 Years
of Excellence

 

Roll Former Corporation

Roll Former Corporation
140 Independence Lane
Chalfont, PA  18914   USA

P: (215) 997-2511
F: (215) 997-5544

Thank you for your interest in the Roll Former Corporation line of quality equipment!

The SSX Seamer is designed to “double lock” a 1” and 1 ½” mechanical lock Standing Seam panel in 26 – 24 ga. Steel, 12 – 20 oz. Copper and .032” Aluminum. It is complete with our front mounted auto / safety switch for effective and safe operation. We can produce a seamer for practically any panel in the industry today! Please specify the panel that you are using!

The SSX Seamer Case will protect your seamer investment. Single Lock and Double Lock Hand Tools are also available for either starting a seam when necessary or finishing it off in tight areas.

Our SSX Heavy Duty Seamer is designed for the 22 ga. Steel and .040” Aluminum applications – 1” and 1 ½” standing seam. This seamer not only has the heavy gauge engineering but is also designed with Optional Slitting Knives to remove a damaged panel or an old standing seam roof, which can be very labor intensive.

Our BSA Batten Seamer is designed to “double lock” seam the 1 ½” x 1 ½” “True Board & Batten” seams. We can also customize a Batten Seamer for your requirement.

SSX Seamer          

$4,000

SSX Seamer Case            

$  290

Single Lock Hand Tool

$  150

Double Lock Hand Tool                               

$  275

SSX Heavy Duty Seamer           

$5,200

Slitting Knives – SSX/HD  

$  400

BSA Batten Seamer   $8,000

 

 

 

 

If you have questions on any of our seaming equipment please do not hesitate to call. Thank you again.

Sincerely,
John

John R. Dumke
Director, Sales - Mkt.
Phone:    215-997-2511  Ext.-13
Fax:        215-997-5544


.

find us on facebook

Copyright © 1997-2005 Roll Former Corporation -- All Rights Reserved

Search Engine Optimization by Dynamic Digital Avertising